December 21, 2011 | Tags:
painting,
preparation,
colour,
Flaking paint is the result of a lack of adhesion between current layers of paint and previous coats. This can be caused by previous products loosing their ability to hold together or water damage from leaking roofs or pipes.
Continue reading this story...
December 21, 2011 | Tags:
exterior,
results,
Old weathered decks can be cleaned by scrubbing them with a timber cleaning solution Like Wattyl Deck Clean. If possible this should be cleaned off with pressure washer but a garden hose on full and a deck scrubbing brush will suffice.
Continue reading this story...
December 21, 2011 | Tags:
advice,
Low sheen is usually the sheen level that we recommend for washable walls in a normal living environment. Solver Maxiwash Flat is lightly washable but tends to mark easily in high ware areas.
Continue reading this story...
December 21, 2011 | Tags:
painting,
interior,
Stains like this tend to be water stains or possum stains and are water soluble, meaning that they will keep bleeding through water-based paint.
Continue reading this story...
December 21, 2011 | Tags:
colour,
Solver Duraguard Satin is the best match to new Colorbond as the sheen level is very close. As to colour, we can match all of the Colorbond colours so all you need to ask for is the colour that you want to match.
Continue reading this story...